Used Timko Aluminium Perforating / Embossing Line | Galaxie Corporation, Wayne, Michigan, USA

This used Timko perforating and embossing line is available from Galaxie Corporation. It is a complete coil-to-coil and cut-to-length line for aluminium and alloys, built in 2019.

It handles coil 400–1,000 mm wide and 0.4–3.0 mm thick, with a 5 t coil capacity. The line embosses with double-sided stucco pattern rolls, perforates in a 200 t eccentric press, then levels the strip and either recoils it or shears it to sheets 3,000–6,000 mm long.

Key Features

• Coil car and mandrel uncoiler with edge control unit
• Peeler / pinch roll and flattener at the entry
• Double-sided embossing stand with stucco pattern rolls
• Looping pit with cascade rolls
• Backed-up precision leveler
• Tension unit with polyurethane-coated rolls
• Digital drives with PLC controls and operator push-button stations

Technical Specifications

• Make: Timko
• Year: 2019
• Material: Aluminium and alloys
• Line type: Coil to coil and cut to length
• Thickness: 0.4–3.0 mm
• Coil width: 400–1,000 mm
• Coil capacity: 5 t
• Coil ID: 508 mm
• Coil OD: 1,600 mm
• Embossing rolls: 480 mm diameter x 1,400 mm roll face, stucco pattern, double sided
• Perforating press: 200 t eccentric
• Press speed: 100–250 strokes/min
• Press stroke: 30 mm
• Press bed area: 900 mm x 1,450 mm
• Recoiler: 5 t, 508 mm diameter drum, variable tension control
• High speed shear: 30 strokes/min
• Sheet length: 3,000–6,000 mm
• Pallet height: 400 mm
• Stacking: Stacker table with side discharge, motorised lift table, side discharge conveyor
• Weight: 5 t

Applications

• Perforated aluminium sheet and coil
• Embossed aluminium sheet with a stucco pattern
• Aluminium sheets cut to length for further fabrication
• Coil-to-coil processing of aluminium strip

Commercial Details

• Make: Timko
• Year: 2019
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material and sizes does the line run? It processes aluminium and alloys from 0.4–3.0 mm thick and 400–1,000 mm wide.
• Can it produce both coil and sheet? Yes, it runs coil to coil using a 5 t recoiler or cut to length with sheets of 3,000–6,000 mm.
• How fast is the perforating press? The 200 t eccentric press runs at 100–250 strokes per minute with a 30 mm stroke.
• What should I ask when enquiring? Ask for photos or video of the line under power, the tooling and perforating dies included, the embossing roll patterns, the PLC and drive details, and loading and shipping arrangements.