Used TMD 10 Stand C-Channel Roll Forming Line | Galaxie Corporation, Wayne, Michigan, USA

This used TMD 10 stand C-channel complete roll forming line is available from Galaxie Corporation. It forms steel strip into C-section channel and is supplied as a full line from uncoiler to run-out table.

It handles material 2.3–3.2 mm thick at a line speed of 50 m/min, driven by a 60 kW motor. Two section sizes are listed: 100 mm x 50 mm x 20 mm and 75 mm x 45 mm x 15 mm. The line is installed and under power.

Key Features

• Double-end mandrel uncoiler with hydraulic expansion
• Shear and end welder for joining coils
• 5-roll straightener ahead of the forming section
• Turks heads fitted
• Friction saw for cutting to length
• Run-out table
• Complete with hydraulics, controls and electrics

Technical Specifications

• Manufacturer: TMD
• Thickness range: 2.3–3.2 mm
• Line speed: 50 m/min
• Section sizes: 100 mm x 50 mm x 20 mm; 75 mm x 45 mm x 15 mm
• Number of stands: 10
• Shaft diameter: 70 mm
• Arbor diameter: 2 inches
• Roll diameter: 2 inches
• Horizontal centres: 15 inches
• Vertical centres: 18 inches
• Motor drive: 60 kW
• Straightener: 5-roll
• Cutting: Friction saw

Applications

• Purlins and framing members for buildings
• Steel C-channel sections for structural support
• Light structural framing and supports

Commercial Details

• Make: TMD
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness can this line form? It is set up for material 2.3–3.2 mm thick.
• What section sizes does it produce? Two C-channel sizes are listed: 100 mm x 50 mm x 20 mm and 75 mm x 45 mm x 15 mm.
• What equipment is included? It includes a double-end mandrel uncoiler, shear and end welder, 5-roll straightener, 10-stand roll former, Turks heads, friction saw, run-out table, hydraulics, controls and electrics.
• What should I ask when enquiring? Ask for photos or video of the line running under power, whether tooling for both sizes is included, details of the controls and electrics, and arrangements for inspection, loading and shipping.