Used Ungerer Cut-To-Length Line With Rotary Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Ungerer cut-to-length line with rotary shear is available from Galaxie Corporation. It uncoils, levels and cuts steel coil into flat sheets, and handles material from 2 mm to 8 mm thick and 610 mm to 2,150 mm wide.

The line runs at up to 50 m/min, depending on strip width and yield strength, and cuts sheets from 1,000 mm to 24,000 mm long. It is equipped with edge trimming, a cassette leveler and a double stacker, and the model is listed as not specified.

Key Features

• Double stub mandrel uncoiler fed by a coil storage ramp and a motorised-lift coil car
• Peeler table with pressure roll, roll coil breaker and powered pinch rolls
• Edge trimmer with AC servo drive, dual rotary scrap choppers and exit scrap conveyor
• Ungerer cassette leveler supplied with 2 cassettes
• Brushing unit and run-out gauging table
• Double stacker with motorised lift table and side squaring
• Operator control stations with digital readouts and digital controllers

Technical Specifications

• Make: Ungerer
• Year: 1989
• Materials: Hot and cold rolled steel (dry, pickled and oiled, HRD, HRP) and galvanised coils
• Thickness: 2–8 mm (0.315 in max)
• Width: 610–2,150 mm
• Max coil weight: 38,000 kg (80,000 lb listed)
• Coil inner diameter: 530 mm, 920 mm (21 in listed)
• Coil outer diameter: 800–2,500 mm (98 in max listed)
• Sheet length: 1,000–24,000 mm
• Side trimming: 10–75 mm per side, across the whole thickness range
• Max package height: 680 mm (without beams)
• Max package weight: 5,000 kg
• Max working speed: 50 m/min, depending on width and yield strength
• Working direction: Left to right
• Cutting unit: Flying shear (high-speed rotary shear)
• Leveler: Parabola; 15 work rolls, 95 mm diameter
• Rewinding: Yes
• Bushing unit: Yes
• Power supply: 400 V ±10%, 50 Hz, three phase
• Auxiliary voltage: 220 V, 50 Hz

Applications

• Producing flat steel sheets from hot and cold rolled coil
• Cutting galvanised, pickled and oiled coil to length
• Preparing sheet and plate blanks for fabrication and processing
• Steel service centres supplying cut sheets

Commercial Details

• Make: Ungerer
• Year: 1989
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and width can it process? It handles material 2–8 mm thick and 610–2,150 mm wide.
• How fast does it run and what sheet lengths can it cut? It runs at up to 50 m/min depending on width and yield strength, cutting sheets from 1,000 mm to 24,000 mm long.
• What optional equipment is listed? Options listed are a Pesmal sheet bander, auto banding, auto wood loading, a feed conveyor, Cyklop banding, an exit conveyor, a Siemens Simatic digital controller and spare parts.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection option, which optional items and spare parts are included, the condition of the leveler cassettes and electrics (400 V, 50 Hz), and loading and shipping arrangements.