Used Waterbury Farrel 2-HI Temper Mill | Galaxie Corporation, Wayne, Michigan, USA

This used Waterbury Farrel 2-HI temper mill is available from Galaxie Corporation. It is a non-reversing, two-high mill for light cold reduction (skin passing) of stainless steel and carbon steel strip.

It takes strip from 14 in (355.6 mm) to 37 in (939.8 mm) wide, with an entry gauge up to 0.125 in (3.175 mm) and an exit gauge down to 0.008 in (0.203 mm). Mill speed is 250–500 fpm (76.2–152.4 m/min), driven by a 250 hp (186.4 kW) main motor.

The line includes a hydraulic-lift coil car, paper winder, winder and payoff reel, and two extra sets of spare rolls.

Key Features

• Non-reversing 2-high mill section
• Main mill frame with two 20 in diameter hydraulic cylinders for load and adjustment
• Roll change sled
• Roll polishing, top and bottom
• Hydraulic entry bridge table
• Fixed coil car with hydraulic lift
• Operator control console

Technical Specifications

• Mill section: 2-Hi, non-reversing
• Material: Stainless steel, carbon steel
• Strip width: 14–37 in (355.6–939.8 mm)
• Maximum entry gauge: 0.125 in (3.175 mm)
• Minimum exit gauge: 0.008 in (0.203 mm)
• Mill speed: 250–500 fpm (76.2–152.4 m/min)
• Main motor: 250 hp (186.4 kW), 650/1300 rpm, water-cooled eddy current clutch, 440 V, 3 ph, 60 Hz
• Pinion stand ratio: 16.8 : 1
• Work roll diameter: 25 in (635 mm) nominal
• Back-up roll diameter: 42 in (1,066.8 mm)
• Mill bearings: Roller type
• Maximum coil outside diameter (winder): 48 in (1,219.2 mm)
• Coil inside diameter (winder): 20 in (508 mm)
• Absolute coil weight: 14,200 lb (6,441 kg)
• Winder power: 150 hp (111.9 kW), water-cooled eddy current clutch, 440 V, 3 ph, 60 Hz
• Winder mandrel: Ø20 in (508 mm), face 42 in (1,066.8 mm), expandable, 19.687 in closed
• Winder tension: 9,900–15,000 lb (4,491–6,804 kg)
• Winder gear reducer ratio: 15.22 : 1
• Payoff power: 3 hp (2.24 kW) AC
• Payoff tension: 8,332 lb (3,779 kg)
• Payoff speed: 500 fpm
• Payoff mandrel diameter: 17.5 in (444.5 mm); 21.5 in (546.1 mm) nominal; 25.0 in (635 mm) with fillers
• Payoff brake: Water-cooled, with manual edge control
• Mill direction: Right to left
• Floor dimensions: 26 ft x 33 ft
• Spares included: 2 extra sets of rolls, 8 chocks available

Applications

• Skin passing and temper rolling of stainless steel strip
• Skin passing and temper rolling of carbon steel strip
• Surface finish and flatness improvement of cold-rolled coil

Commercial Details

• Make: Waterbury Farrel
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What strip can this mill handle? It runs stainless and carbon steel strip 14–37 in (355.6–939.8 mm) wide, from 0.125 in (3.175 mm) entry gauge down to 0.008 in (0.203 mm) exit gauge.
• How fast does it run? Mill speed is 250–500 fpm (76.2–152.4 m/min).
• What spares come with it? Two extra sets of rolls are included, and 8 chocks are available.
• What should I ask when enquiring? Ask for photos or video of the mill under power, inspection arrangements, what accessories and spare rolls are included, the condition of the drives, electrics and control console, and loading and shipping options.