Used Well Time Injector Head Loop Slitting Line | Galaxie Corporation, Wayne, Michigan, USA

This used Well Time injector head loop slitting line is available from Galaxie Corporation. It cuts wide steel coil into narrower strips, and this line takes coil 900–1,840 mm wide and 2.0–10 mm thick.

It handles coils up to 25 t and runs at up to 120 m/min. Two injector slitter heads and a double looper are fitted, and the line is described as complete from coil car to exit coil car. The year of manufacture is 2005.

Key Features

• Two injector slitter heads, each a dual head, with double loop capability
• Double stub mandrel uncoilers with hydraulic sliding base and hydraulic expansion
• 5-roll flattener, entry pinch rolls and crop shear
• Looping pit with cascade rolls and a double looper
• Shimless tooling on 330 mm diameter arbors with hydraulic locking heads
• Two scrap winders, drag board tension stand and bridle roll
• Recoiler with hydraulic drum and push-off, exit coil car and 4-arm turnstile

Technical Specifications

• Make: Well Time
• Year: 2005
• Thickness range: 2.0–10 mm
• Coil width: 900–1,840 mm
• Coil capacity: 25 t
• Maximum coil weight: 50,000 lb
• Line speed: 120 m/min
• Cutting capacity: 22 cuts at 2.0 mm
• Coil ID entry: 508–711 mm
• Exit coil ID: 508 mm and 610 mm
• Coil OD: 1,900 mm
• Arbor diameter: 330 mm
• Slitter heads: 2 dual injector heads
• Main drive: 185 kW DC drive
• Gearbox: 2-speed
• Drives: ABB digital drives DCS 500
• Control: PLC with touch screen operator panel

Applications

• Slitting steel coil into narrower strips for further processing
• Preparing heavier-gauge coil up to 10 mm for service centres
• Supplying strip to fabrication and forming operations

Commercial Details

• Make: Well Time
• Year: 2005
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can this slitting line process? It takes coil 900–1,840 mm wide and 2.0–10 mm thick, up to 25 t with a 1,900 mm maximum outside diameter.
• How fast does it run? The line speed is 120 m/min.
• What control system does it use? It has PLC controls with a touch screen operator panel and ABB DCS 500 digital drives.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection opportunity, the tooling and spare arbors included, the condition of the drives and electrics, and loading and shipping arrangements for a line of this size.