Used Yoder 36" x .125" Slitting Line | Galaxie Corporation, Wayne, Michigan, USA

This used Yoder slitting line is available from Galaxie Corporation. It cuts wide coil into narrower strips and handles material up to 36 inches wide and .125 inches thick, in coils up to 15,000 lb.

The line is a complete set: a Yoder uncoiler and Yoder slitter with 4.500" arbors, a custom-built tension stand, a recoiler with a 40 HP eddy current drive and a self-contained hydraulic scrap winder. Tooling in the form of knives, spacers and rubbers is included.

Key Features

• Uncoiler with hydraulic expansion, hydraulic sliding base and air-cooled brake
• 20" ID and 24" ID adapter plates for the uncoiler
• Slitter with electric feed-up drive, pinch rolls and edge guides
• Pneumatic drag wipe type tension stand with overarm
• Recoiler with hydraulic push-off, mechanical gripping and expansion, and pneumatic overarm
• Self-contained hydraulic scrap winder
• Knives, spacers and rubbers included

Technical Specifications

• Brand: Yoder
• Maximum width: 36 inches
• Maximum thickness: .125 inches
• Gauge capacity: .008–.125 inches
• Coil weight: 15,000 lb
• Arbor size: 4.5 inches
• Uncoiler expansion range: 15-1/2"–18-1/2" hydraulic expansion
• Uncoiler adapter plates: 20" ID and 24" ID
• Recoiler coil capacity: 15,000 lb
• Recoiler ID range: 16"–20" ID with adapter plates
• Recoiler drive: 40 HP eddy current
• Scrap winder capacity: 1,500 lb
• Electrics: 460 volt, 3 phase
• Stock number: 102190A

Applications

• Slitting steel and other metal coil into narrower strips
• Preparing strip for stamping and roll forming
• Supplying narrower coil to fabrication and tube-making operations

Commercial Details

• Make: Yoder
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil can this slitting line process? It handles coil up to 36 inches wide, from .008 to .125 inches thick, weighing up to 15,000 lb.
• What arbor size does the slitter use? The Yoder slitter has 4.5-inch arbors.
• Is tooling included? Yes, knives, spacers and rubbers are listed with the line.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection opportunity, the exact tooling and accessories included, the condition of the electrics (460 volt, 3 phase) and drives, and loading and shipping arrangements.