Used Zappa/Siemag Triple Turret Head Slitting Line | Galaxie Corporation, Wayne, Michigan, USA

This used Zappa/Siemag triple turret head slitting line with coil banding line is available from Galaxie Corporation. It cuts wide coil into narrower strips and rewinds them.

It handles strip 400–1,550 mm wide and 0.4–3 mm thick, with coils up to 25 t and 1,800 mm outside diameter, at speeds up to 150 m/min. The line is listed with a Siemens S7 electrical system and a semi-automatic banding station for finished coils.

Key Features

• Underfloor coil car and decoiler with hydraulic hold-down arm, shifting base plate and mandrel support
• Coil opener with two quick-lifting pinch rolls and hydraulic crop shear
• Slitting stand with turnstile for changing blade sets, with 3 changing places
• Hydraulic blade clamping nuts and electromechanical blade shaft adjustment
• Scrap baller handling scrap 5–40 mm wide
• Looping pit with carry-over car, felt brake and roller brake
• Recoiler with separating shaft, hydraulic separating arm and stripper plate
• Banding station with 1–4 straps, magnetic lifter, 4-place carousel and weighing roller table

Technical Specifications

• Maker: Zappa/Siemag
• Year: 1984 (equipment listed as 1984/2006)
• Strip width range: 400–1,550 mm
• Strip thickness range: 0.4–3 mm
• Number of slits: 30 cuts of 0.6 mm; 10 cuts of 2.5 mm
• Minimum slit strip width: 30 mm
• Maximum tensile strength: 420 N/mm²
• Maximum coil outside diameter: 1,800 mm
• Maximum coil weight: 25 t
• Maximum speed: 150 m/min
• Line direction: Left to right
• Pinch rolls: 2
• Blade shaft: 180 mm
• Blade diameter: 275 mm
• Slitter main drive: 75 kW
• Blade changing places: 3
• Scrap width: 5–40 mm
• Recoiler mandrel: 508/610 mm
• Recoiler main drive: 95 kW
• Banding straps: 1–4
• Electrics: Siemens S7

Applications

• Slitting steel coil into narrower strips
• Preparing strip for roll forming and tube making
• Producing coils for stamping and blanking
• Service centre coil processing

Commercial Details

• Make: Zappa/Siemag
• Year: 1984
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can this line handle? It takes coils up to 25 t and 1,800 mm outside diameter, with strip 400–1,550 mm wide.
• What thickness range does it slit? It runs strip 0.4–3 mm thick, up to 420 N/mm² tensile strength.
• Does it include a banding line? Yes, it has a semi-automatic banding station taking 1–4 straps, with a magnetic lifter and a 4-place carousel.
• What should I ask when enquiring? Ask for photos or video of the line under power, an inspection option, which blade sets and tooling are included, the condition of the Siemens S7 controls and electrics, and loading and shipping arrangements.