Vertical Cartridge Dust Collector | Jinwo, Qingdao, China

Jinwo's Vertical Cartridge Dust Collector removes dust from industrial air using vertically mounted filter elements, which can be round bags, flat bags or cartridges. Dust-laden gas enters at the side, dust collects on the outside of the filters, and cleaned air leaves through the top outlet.

Its upright layout suits plants with plenty of height but little floor space. After each cleaning cycle, dust drops straight into the hopper below and is discharged through an ash valve.

Key Features

• Vertical cabinet in a cylindrical or square form, with upper, middle and lower sections
• Upper section houses the cleaning device and air outlet; the middle holds the filter chamber and tube sheet; the lower holds the dust hopper and ash discharge
• Filter bags are supported by cages and fixed on the tube sheet
• Cleaning by pulse-jet or reverse air, with mechanical vibration also possible; some models offer off-line single-chamber cleaning
• Access door at the top or side for replacing filter elements
• Filtration area can be increased by stacking filter layers vertically, so one unit can handle large air volumes

Technical Specifications

• Filter elements: Vertical round bags, flat bags or cartridges
• Filtration mode: External filtration
• Cleaning system: Pulse-jet or reverse air; mechanical vibration also possible
• Air inlet / outlet: Mostly side inlet, top outlet
• Floor area: 1/3–1/2 of that of side-insert models

Applications

• Dust control in iron and steel, cement, chemical and grain processing plants
• Raw material transfer points
• Boiler flue gas outlets
• Powder conveying systems
• Sandblasting and shot blasting machines

Commercial Details

• Brand: Jinwo
• Manufacturer: Qingdao Jinwo Machinery Manufacturing Co., Ltd.
• Place of origin: Qingdao, Shandong, China

Frequently Asked Questions

• What cleaning methods are available? Pulse-jet and reverse air cleaning are offered, and mechanical vibration is also possible; some models support off-line single-chamber cleaning.
• Why choose a vertical design? It takes only 1/3–1/2 of the floor area of side-insert collectors, so it suits narrow plants with enough height.
• Can it handle large air volumes? Yes, filtration area can be increased by stacking filter layers vertically, so a single unit can meet large air volume needs.
• What should I send for a quotation? Send the air volume required, the type of dust and its concentration, gas temperature, the emission point it will serve, available floor space and height, and your preferred filter type and cleaning method.