Scaffolding Plank Roll Forming Line 240–520 mm | Servosteel, Istanbul, Turkey

Servosteel's Scaffolding Plank Roll Forming Line produces the steel walking platforms used in construction scaffolding. Anti-slip surface embossing and drainage holes are formed in-line as the strip is rolled.

The line is offered across a series of sizes, with roll tooling designed to the customer's profile drawing. A press station for hook-end forming and end trimming can be added at the end of the line.

Key Features

• Diamond or knurl anti-slip embossing pressed continuously in the roll forming stations
• Drainage and lightening holes punched in-line, reducing plank weight
• Optional end-processing press for hook bending and end trimming
• Servo-controlled cut length, entered as a recipe on the control panel and changeable within a batch
• Roll tooling designed to the customer's drawing
• Schneider PLC with touchscreen operator panel

Technical Specifications

• Sheet thickness: 1.2–2.0 mm
• Sheet width: 240–520 mm
• Line speed: 4–20 m/min
• Roll forming stations: 15–26
• Total motor power: 11–22 kW
• Line components: Decoiler, straightener with servo feeder, punching stations, roll former, cutting unit, optional end-processing station
• Control: Schneider PLC and touchscreen

Applications

• Scaffolding systems
• Construction equipment
• Scaffolding and formwork rental
• Site safety platforms

Commercial Details

• Brand: Servosteel
• Manufacturer: Servosteel
• Place of origin: Istanbul, Turkey

Frequently Asked Questions

• Is the anti-slip pattern formed in-line? Yes, the embossing and punching units are integrated, so the pattern is formed while the profile is being rolled.
• How is plank length set? Length is entered as a recipe on the control panel, and the servo-controlled cut length can be changed within a batch.
• Is the end-cap pressing unit included? It is optional and can be added at the end of the line; otherwise end processing is done at a separate station.
• What should I send for a quotation? Send the plank profile drawing, material and thickness, plank lengths, output target, and whether you need the hook-end press and the embossing and hole patterns.