Used Sesco 1" x 0.105" Scrap Winder | Galaxie Corporation, Wayne, Michigan, USA

This used Sesco scrap winder is available from Galaxie Corporation. It winds strip scrap from a press or slitting operation into a ball so it can be handled and removed.

It is rated for strip 1 inch wide and 0.105 inch thick. It is hydraulic motor driven, winds with an oscillating motion and holds a scrap ball up to 18 inches wide and 40 inches in diameter.

Key Features

• Hydraulic motor drive
• Oscillate wind pattern
• Air clutch
• Manual scrap removal

Technical Specifications

• Make: Sesco
• Type: Scrap winder
• Strip width: 1 inch
• Strip thickness: 0.105 inch
• Drive: Hydraulic motor
• Winding: Oscillate wind
• Scrap ball capacity: 18 inches wide x 40 inches diameter
• Clutch: Air clutch
• Scrap removal: Manual

Applications

• Winding strip scrap from stamping presses
• Collecting scrap from slitting and coil processing lines
• Compacting strip offcuts for easier handling and removal

Commercial Details

• Make: Sesco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What strip size does this scrap winder handle? It is rated for strip 1 inch wide and 0.105 inch thick.
• How big a scrap ball can it make? It holds a scrap ball up to 18 inches wide and 40 inches in diameter.
• How is it driven and how is scrap removed? It is hydraulic motor driven with an air clutch, and the scrap ball is removed manually.
• What should I ask when enquiring? Ask for photos or video of the winder running, and confirm the hydraulic power unit and air supply requirements, the model and year, and the controls and electrics. Also ask about loading and shipping arrangements.