Q-Fin | Deburring Machines, Bergeijk, Netherlands

Q-Fin B.V. – Deburring, Edge Rounding and Finishing Machines from Bergeijk, Netherlands

Company at a glance

• Full name: Q-Fin B.V. It trades as Q-FIN Quality Finishing Machines.
• Location: Wilgenakker 8, 5571 SJ Bergeijk, North Brabant, Netherlands
• Type: Manufacturer
• Founded: 2013
• Staff: About 35 (2022)
• Sales: Sales teams for the Benelux, Germany and Austria, plus sales partners in other countries
• Main focus: Machines that deburr, round edges and finish sheet metal parts after laser, plasma or punch cutting, plus automation to load and unload them

About Q-Fin

Q-Fin B.V. was founded in 2013 in the south of the Netherlands. It designs and builds machines that remove burrs, round edges and give a clean surface finish to sheet metal parts after cutting. Since 2017 it has been based in its own factory in Bergeijk, North Brabant. In 2023 it opened a second building for Q-Fin Handling Solutions, which develops automation for the deburring process.

The main machines are wide-belt finishing machines in several widths. The F-series covers all-round deburring, edge rounding and line finishing, from the compact F250 for small parts to the F1500 wide-belt machine. The SER and M series add non-directional finishing and edge rounding to a radius of 2 mm or more. TwinLine machines and turning units finish both sides of a part in one pass. The DS-Line slag hammers remove slag from thermally cut steel parts.

Q-Fin also makes hand-held and table-top tools for smaller shops. These include the TopGrinder and ProGrinder hand finishing machines (more than 1,000 TopGrinders had been sold by 2024), the TopEdge edge milling machine, and the SkipJoint microjoint remover. For automation, the Qube range loads and unloads finishing machines, handling parts of up to 90 kg, and the Q-Bot cobot cell runs finishing fully automatically. Several Q-Fin machines have won awards at trade fairs, including EuroBLECH.

Machines and products

Wide-belt finishing machines

• F-series all-round deburring and finishing machines (F250, F800, F1200 and F1500)
• SER series all-in-one machines for deburring, edge rounding and non-directional finishing (SER600, SER1200 and SER1500)
• M-series machines for non-directional finishing (M1200 and M1500)

Double-sided finishing

• TwinLine and TwinLine Twister machines
• Twister and Rotator turning units

Slag removal

• DS600 and DS1200 slag hammers for thermally cut steel parts

Hand and table-top tools

• TopGrinder and ProGrinder hand finishing machines
• TopEdge table-top edge milling machine
• SkipJoint microjoint remover

Automation and handling

• Qube loading and unloading systems (Qube 8, 15, 50, 50D, 60, 90 and 90D)
• Q-Bot cobot finishing cell
• RC1200 robot cell
• Return conveyors and transport conveyors

Extraction

• WES wet extraction system for abrasive dust

Product range snapshot

• Main strength: Deburring and finishing machines for cut sheet metal parts
• Finish types: Deburring, edge rounding to a radius of 2 mm or more, line finishing and non-directional finishing
• Double-sided: Machines and turning units that finish both sides in one pass
• Automation: Loading and unloading systems for parts up to 90 kg, robot cells and a cobot cell
• Small shops: Hand finishing machines, edge milling and microjoint removal tools

Services

• Product demonstrations
• Advice on the right finishing process for each part
• Automation of the finishing process
• Technical support
• Sales through its own teams in the Benelux, Germany and Austria, and through partners in other countries

Who Q-Fin suits best

Q-Fin suits laser cutting and sheet metal workshops whose parts need clean, safe edges before bending, welding, painting or powder coating. A common example is a job shop with a fibre laser that is spending hours deburring parts by hand. Small shops can start with a TopGrinder or SkipJoint. Larger shops can add a wide-belt machine, double-sided finishing and Qube loading so finishing keeps up with the laser. Parts that need edge rounding of R2 or more before coating are a good fit for the SER series.

Frequently asked questions

Where is Q-Fin located?
Q-Fin is at Wilgenakker 8, 5571 SJ Bergeijk, Netherlands, where it designs and builds its machines.

What does a Q-Fin machine do?
Q-Fin machines remove burrs, round edges and give a clean surface finish to sheet metal parts after laser, plasma or punch cutting. Some models also remove slag or finish both sides of a part in one pass.

Can Q-Fin automate deburring?
Yes. The Qube range loads and unloads finishing machines and handles parts of up to 90 kg. Q-Fin also offers a cobot cell and a robot cell for fully automatic finishing.

How do I get a price from Q-Fin?
Send your enquiry through the MachineMatcher form on this page. Include your part sizes, materials and thicknesses, the finish you need and your daily volume, and we will pass it on to Q-Fin.

Looking for a deburring or finishing machine from Q-Fin? Send your enquiry through the MachineMatcher form and we will pass it on.